A5 / A6 / A7 / A8 / A9 / A10 / A11 / A12 / A14 / A16 concrete structures reinforced with welded steel mesh fabric

Welded fabric with the same or different of the longitudinal and transverse rebar spacing in a certain vertical arrangement, all cross spots are welded by resistance spot welding together to be reinforced steel mesh.

HS code: 73142000

Reinforced steel mesh are produced according to National Standard JGJ114.

According to the surface appearance of reinforced steel mesh was classified below:

Cold rolled ribbed steel wire reinforced steel mesh

Cold drawn plain steel wire reinforced mesh

Material of reinforced steel mesh: Q195, CRB550; CRB600H, HPB235, HPB300, LG510, HRB400

Wire diameter of reinforced steel mesh: 5~16mm

Length of reinforced steel mesh: not more than 12m

Width of reinfroced steel mesh: not more than 3.4m

The space of vertical steel wire: 200mm

The spacing of horizontal steel wire: 200mm

Normally, export the size of the reifnorced steel mesh products is 2.2m * 5.8m or 2.2m * 11.8m, a 40HQ container can load 26tons. This size is easy to load the container and load the maximum quantity

Advantage of reinforced steel mesh:

Reinforced steel mesh is finished on automatic and intelligent production line, which is controled stictly in mesh size, rebar wire diameter and quality.Especially, big rigidity, good elasticity, accurate spacing and high strength welding spot. Therefore improve and guarantee engineering quality.

The longitudinal and transverse bars of reinforced steel mesh are formed a net structure which bonded firmly with concrete,and bearing-loading can be distribeted evenly, which obviously improves the seismic and cracked resistance of reinforced concrete stuctures.

Application of reinforced steel mesh fabric:

Highway Cement Concrete Pavement Engineering

Bridge Engineering

Tunnel Lining surpport and reinforced

Technical data of reinforced steel mesh

Note: According to the actual condition,the wire diameter of rebar is between 4mm to 12mm, there is 0.5mm tolorance for the wire diameter.

The Skatch of reinforced steel mesh for A5 / A6 / A7 / A8 / A9 / A10 / A11 / A12 / A14 / A16

NL= Number of longitudinal bars PL= pitch of longitudinal bars dL= diameter of longitudinal bars NC=Number of transverse bars	L= length of longitudinal bar B=Length of transverse bar u1=Overhang of longitudinal bars u2=Overhang of longitudinal ba

Specification of reinforced steel mesh for A5 / A6 / A7 / A8 / A9 / A10 / A11 / A12 / A14 / A16